Back to top

1998 Bristol Channel Cutter 28

Halifax, Nova Scotia, Canada


Hull and deck originally built in 1976 but first completed and registered in 1998. Returned to boat yard for refit and additions 2002, then refit and new engine in 2017.

Beautiful wood work with new bull works plus a lot more!!!

2002 mast, sails, running rigging and interior upgrades. 2017 Yanmar 30HP engine (30 hours).

Interior has very nice fit and finish. Nice galley and enclosed head.

Professionally refitted and shows it.

2017 survey on file.

Owner selling due to relocation and selling for a fraction of invested.


Basic Boat Info

Price: C$89,900
Make: Bristol Channel Cutter
Model: 28
Year: 1998
Condition: Used
Category: Sail
Construction: Fiberglass


Length: 28 ft
Length Overall: 37'9 ft
Length Of Deck: 28'1 ft
Beam: 10'1 ft
Displacement: 14,000 lb
Ballast: 4,600 lb

Engines / Speed

Engines: 1
  • Make: Yanmar
  • Model: 3YM30E
  • Fuel: Diesel
  • Engine Power: 30hp
  • Type: Inboard
  • Year: 2017
  • Engine Hours: 30


Fuel Tanks: 1
Fuel Tank Capacity: 12 gal
Water Tanks: 1
Water Tank Capacity: 40 gal
Holding Tank Count: 1
Holding Tank Capacity: 13 gal


Heads Count: 1
Boat Class: Cutter


Sunnybrook Yachts
Contact us for details on how to buy this boat - we handle everything from pre purchase surveys through to financing(if required) and insurance needs. Call us at 902 275 2424 or email us at - thanks.
Sunnybrook Yachts


Sunnybrook Yachts
130 Marina Rd, Suite 202 PO Box 546
CHESTER, Nova Scotia, CA, B0J 1J0
Tel:902 444 4500


White fiberglass hull with green/cream cove stripe; full keel with large stern hung rudder; tiller sterning; fiberglass plywood cored cream decks with nonskid, canvas covered cabin top; new southern mahogany bull works and white oak rails, teak wood work, stainless steel stanchions and single life lines; bow sprit, 2 cabin hatches, 8 opening bronze ports, tan spray hood for main hatch, 2X dorade vents, deep trench cockpit with teak coamings. 


Forepeek chain locker with access door, Marine enclosed head with holding tank/overboard discharge, Stainless steel sink with Corian counter top:storage lockers; next aft is the main salon with settees, port pilot berth;  aft port galley with 2 burner and oven propane stove, stainless steel sink with manual water(40 Gal tank) ice box and storage; opposite is a settee and quarter berth.  LED interior and exterior lighting, Sig Marine diesel heater, Extensive storage through out, teak and holly cabin sole.

Engine Electrical

2017 Yanmar 30hp diesel, new shaft, stuffing box and prop(30hours).

DC electric from two newer marine batteries( Trojan 100amp AGM), 110V battery charger and Victron Battery Monitor, 110V shore power with cord.

Cabin, navigation, mast head LED tri-light and anchor lights.(all LED)


Standard Horizon VHF, bulkhead mounted compass, Horizon multi speed and depth, Standard Horizon CP300 chartplotter with maps.

Sails Rigging

Aluminum double spreader mast steped on keel; aluminum boom. SS wire rigging and dacron running rigging, Furlex fore sail furling, lazy jacks, (All 2002)

2x Barient 22-39 two speed winches in cockpit, 3X Lewmar 8s on mast, 2X Lewmar 8s on cabin top, 4 winch handles.

Sails are all year 2002 with very light use, Green Sunbrella covers;

Dacron main sail, fore sail and stay sail.


25lbs Bruce anchor, 35lbs CQR, 25lbs fisherman anchor, chain and rode, manual Simpson Lawrance windless, 4 life jackets, docklines and fenders, flares, 2X fire extinguishers, boat hook, life sling and horse shoe, Fox heaving line,  jack stands, sun cover.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

Contact John Suederick at for a full review.

Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.